Search results for 'Drive' and 'x'='x and 1>1'
-
-
An error occurred, please try again later.
Loading, please wait...
-
- More variants than in the standard
- Diameter: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100, 125 mm
- Stroke length: 1 ... 500 mm
- Force: 51 ... 7363 N
- Double-acting
- Fixed/self-adjusting cushioning
Learn More
-
- Lighter than other semi-rotary drives
- Housing protected against splash water and dust
- Size 6, 8, 12, 16, 25, 32, 40 mm
- Torque 0.15 ... 20 Nm
- Swivel angle 90, 180, 270°
- Position sensing
- Fixed elastic cushioning elements on both sides
Learn More
-
- Slot nuts for various drives, and for handling and assembly technology.
Learn More
-
- Multi-plugs KSV and suitable barbed connectors
- Multi-sockets KDVF and suitable terminal sockets
Learn More
-
- Weather resistant
- Resistant to chemicals
- Resistant to hydrolysis
- Suitable for use in the food industry
- Outside diameter: 4 ... 16 mm
- Internal diameter: 2.9 ... 12 mm
- Temperature-dependent operating pressure: -0.95 ... 14 bar
- Ambient temperature: -30 ... 80° C
- Operating medium
- Compressed air
- Vacuum
- Water
Learn More
-
- Addressable volume range from microlitres to millilitres
- High level of precision with a wide volume range
- Single-channel dispense head or multi-channel mounted on a rail
- 8-channel dispense head for microwell plates
- Media-isolated solenoid valve VODA-FD72
- Pressure 0 – 0.5 bar
- Coil 24 VDC
- Material PPS, seal FPM
Learn More
-
- Potential 12, 24, 42, 48 V DC, 24, 42, 48, 110, 230, 240 V AC
- Port arrangement according to industry standard.
Learn More
-
- Barbed fitting connection 3 mm
- Flow rate 60 l/min
- Pneumatic-mechanical sequencer with 12 steps and start logic circuits
- Ready-to-install sequence controller
- Acknowledgement-controlled motion sequences
Learn More
-
- Port Rp 1/4, Rp 3/8, Rp 1/2, Rp 3/4, Rp1, Rp1 1/4, Rp1 1/2, Rp2, Rp2 1/2
- Flow rate 100 ... 8900 l/min
- Electric and pneumatic actuation
- Ball valve with drive
- Namur port pattern, VDI/VDE 3845
- Corrosion and acid-resistant designs
- 2-way on-off valve
Learn More
-
- Diameter: 12, 16, 20, 25 mm (standard)
- Diameter: 32, 40, 50, 63 mm
- Stroke length: 1 ... 500 mm
- Force: 51 ... 1870 N
- Double-acting
- Position sensing
- Fixed/adjustable/self-adjusting cushioning
Learn More
-
- Diameter: 100, 125, 160, 200, 250, 320 mm
- Stroke length: 40 ... 990 mm
- Force: 4712 ... 48255 N
- Integrated displacement encoder
- A choice of integrated positioner
- and valve block
- Piston rod with male thread
- Based on ISO 3358 or ISO 15552
Learn More
-
- Highly resistant to UV radiation and stress cracks
- Outside diameter: 4 ... 12 mm
- Internal diameter: 2.6 ... 8 mm
- Working length: 0.5 … 6 m
- Temperature-dependent operating pressure: -0.95 ... 10 bar
- Operating medium
Learn More
-
- Highly resistant to microbes and hydrolysis
- Suitable for use in the food industry
- Outside diameter: 2 ... 16 mm
- Internal diameter: 2.1 ... 11 mm
- Temperature-dependent operating pressure: -0.95 ... 10 bar
- Ambient temperature: -35 ... 60° C
- Operating medium
- Compressed air
- Vacuum
- Water
Learn More
-
-
- Sub-base in polymer technology
- Tamper-proof fixed throttle
- 3 valve sizes in the mix, expandable in individual steps
- Flow rate 160 ... 870 l/min.
- Width 10, 14 and 20 mm
- Push-in connector 3, 4, 6, 8, ,10, 12 mm
- CTEU connection
- Protection class IP65, IP67
- Valve functions 5/2, 5/3, 2x3/2, 2x2/2 and special
Learn More
-
- Connection G1/4 ... G2, also available with NPT thread
- Flow rate 1400 to 31000 l/min
- Cable connection
- Solenoid actuated, piloted, pneumatic spring return
- For control of gaseous and liquid media.
Learn More
-
- Port DN 13, 1/2"; DN20, 3/4"; DN25, 1"; DN32, 1 1/4"; DN40, 1 1/2"; DN50, 2"
- G-thread to DIN ISO 228-1 or NPT-thread to ANSI/ASME B 1.20.1 or Rc-thread to DIN 10226-2
- Medium pressure 0 ... 30 bar
- Valve function 2/2, NC (Normally Closed), NO (Normally Open), DA (Double Acting
- Suitable for nearly all media
- High chemical and thermal resistance
- ATEX-approval
Learn More
-
- From the VG series
- Connection M3, M5, M7, G1/8, G1/4
- Push-in connector 3, 4, 6, 8, 10 mm
- Flow rate 90 ... 1380 l/min
- Pressure range -0.9 ... 10 bar
- Temperature range −5 ... +60°C
- Voltage 5, 12 24 V DC
- In-line valves, semi in-line valves, sub-base valves
- Solenoid actuated, piloted
- Pneumatic and mechanical spring return
Learn More
-
- Heavy-duty guide for large loads and torques
- Diameter: 18, 25, 40 mm
- Stroke length: 1 ... 5000 mm
- Force: 153 ... 754 N
- Position sensing
- End position cushioning with shock absorber
- Recirculating ball bearing guide
Learn More
-
- Clevis foot and trunnion mountings for various drives
Learn More
-
- AG connection: G⅛, G¼, G⅜, G½
- IG connection: G¼, G⅜, G½
- Barbed connector: N9
- Optional 3/2-way hand slide valve
- Certified by IFA (Institute for Occupational Safety and Health)
Learn More
-
- For applications with high pressure ranges
- Outside diameter 4 ... 28 mm
- Internal diameter: 2.5 ... 23 mm
- Temperature-dependent Operating pressure -0.95 ... 35 bar
- Ambient temperature -30 ... 80°C
- Operating medium
Learn More
-
- Fieldbus module for valve modules VTOC, VTUB, VTUG, MPAC, MPAL and CPV
- Bus protocols:
- CANopen
- Profibus DP
- DeviceNet
- AS-Interface
- CC-Link
- EtherCAT
- EtherNet/IP
- Modbus/TCP
- PROFINET
- CPI-B
- Optional: two I-Port interfaces via electrical connection block CAPC base for installation system CTEL
Learn More
-
- Amplifier actuator
- Pressure switch and vacuum actuator.
Learn More
-
- Voltage 12, 24 V DC, 24, 110, 230 V AC
- Connection plate valve
Learn More