Valves

• Connection 1/4", 1/2", clamp
• G thread or NPT thread
• Pressure range 0 ... 6 bar
• Pneumatic actuation
• 2/2-way pinch valve
• Aluminium + stainless steel housing (Clean Design)
• Sealing material EPDM, NBR, silicone
• For controlling fluid/powder media, solids, and material mixtures

• Flow rate: up to 1500 l/min
• Linear characteristic curve for simple programming
• ATEX-certified
• Highly dynamic

• With integrated piezo technology
• QS4 connection or connecting plate
• Flow rate 20 l/min
• 3-way proportional pressure regulators, directly actuated
• Pressure ranges -1 ... 0 bar, 0 ... 0.2 bar, 0 ... 1 bar, 0 ... 2 bar, 0 ... 6 bar

• Connection Pk 3
• Flow 50 ... 105 l/min.

• Service life > 2 billion switching cycles
• Switching frequencies up to 1000 Hz
• Very good reproducibility
• Use: fast sorting with air jet function
• 2/2-way valves
• Flow rate 50 ... 100 l/min
• Manifold blocks

• Individual valve for clean design,
• Can be used in the food zone (based on the EN 1672-2 standard)
• Connection G1/8
• Push-in connector 6 mm
• Flow 300 ... 650 l/min
• Voltage 24 V DC
• Sub-base valve
  • Electrically actuated, piloted, pneumatic spring return
  • Connection via cable end
  • Signal status display with LED
• Individual sub-bases
• Manifold blocks.

• Fast-switching valve for higher flow rates
• Connection M7; QS4
• Flow rate 100 l/min
• Voltage 24 V DC
• Semi in-line valve
• Sub-base valve
• Solenoid actuated, directly actuated
• Sub-bases
• Manifold sub-bases.

• Short switching times
• Use as a pilot valve
• Port M3
• Flow rate 10 ... 30 l/min
• Voltage 5, 12, 24 V DC
• Semi in-line valve
• Sub-base valve
• Electrically actuated, directly actuated
• Manifold blocks
• Manifold sub-bases.

• Compact design
• Connection M5
• Plug connector 3, 4, 6 mm
• Flow rate 180 to 200 l/min
• Voltage 5, 12, 24 V DC
• In-line valve
• Solenoid actuated
• Connection plates.

• Freely configurable PID controller
• External sensor input
• Connection: G1/8, G1/4, G1/2 (sub-base)
• Flow rate: 380 ... 7000 l/min.
• 3-way proportional pressure regulators
• Multi-sensor control (cascade control)
• Control characteristics adjustable via FCT

• Also available on valve terminal MPA-S
• Connection G1/8, G1/4, G1/2
• Flow rate: 380 ... 7000 l/min.
• 3-way proportional pressure regulators
• Choice of 3 regulator settings (fast, universal, precise)
• Display available as option

• Also available on valve terminal MPA-S
• Connection NPT1/8-27, NPT1/4-18, NPT1/2-14
• Flow rate: 380 ... 7000 l/min.
• 3-way proportional pressure regulators
• Choice of 3 regulator settings (fast, universal, precise)
• Display available as option

• Size 1" ... 4" or DN 25 ... DN 100
• Type of connection clamp, welded end, thread
• Nominal pressure range PN 10
• Manual actuation
• 2-way disc valve
• Seal material EPDM, FPM
• For controlling water and neutral liquids

• Port DN 13, 1/2"; DN20, 3/4"; DN25, 1"; DN32, 1 1/4"; DN40, 1 1/2"; DN50, 2"
• G-thread to DIN ISO 228-1 or NPT-thread to ANSI/ASME B 1.20.1 or Rc-thread to DIN 10226-2
• Medium pressure 0 ... 30 bar
• Valve function 2/2, NC (Normally Closed), NO (Normally Open), DA (Double Acting
• Suitable for nearly all media
• High chemical and thermal resistance
• ATEX-approval

• Connection 1/2, 3/4, 1, 1 1/4, 1 1/2, 2
• G thread or NPT thread
• Pressure range 0 ... 40 bar
• Valve function 2/2 NC
• Use with slightly contaminated media also possible
• Use for steam applications possible
• Direct supply of pilot air.

• Input pressure 0 ... 50 bar
• Pressure regulation range 0.2... 20 bar, 0.4 ... 40 bar
• Nominal size 2.5 mm
• 3-way proportional pressure regulators
• Analogue setpoint 0 ... 10 V DC, 4 ... 20 mA

• Also for servopneumatic applications/positioning with SPC200 and SPC11
• Connection: M5, G1/8, G1/4, G3/8
• Flow rate: 100 ... 2000 l/min.
• 5/3-way proportional directional control valve, normally closed
• Electronic throttle valve
• Setpoint module available as accessory

• For simple control tasks
• Connection G1/8
• Flow rate 850 l/min.
• 3-way proportional pressure regulators
• Setpoint module available as accessory

• With proportional solenoid
• Connection: G1/8, G1/4, G1/2
• Flow rate: 0 ... 8000 l/min.
• 3-way proportional pressure regulators
• Setpoint module available as accessory

• For servopneumatic applications with CPX-CMAX and CPX-CMPX
• Connection: G1/8, G1/4, G3/8
• Flow rate: 350 ... 2000 l/min
• 5/3-way proportional directional control valve, closed
• Fully digitised, with integrated pressure sensors
• Diagnostic capabilities
• With switching output for actuating a clamp-type brake unit

• Internal/external pilot air reversing via internal shuttle valve
• Valve function 3/2, 5/2 monostable and bistable
• Port G1/4, G1/2, NPT1/4, NPT1/2 and Namur
• Voltage 24, 110, 230 V DC, UC
• Explosion protection EX me and EX ia, ATEX
• Sturdy and corrosion-resistant thanks to tough enamel surface

• Connection: G¼, G¼, NPT¼ and Namur
• Voltage: 24, 110, 230 V DC, AC, UC
• Explosion protection: EX me and EX d, ATEX
• Robust and corrosion resistant thanks to hard-ematalised surface
• SIL certificate for ESD applications.

Manifold rails for Tiger 2000

Manifold rails for Tiger Classic